Mohammad Abuabiah
- Nature of Work
- Academic
- Profession
- Assistant Professor
- Email Address
- [email protected]
Mohammad Abuabiah
- Nature of Work
- Academic
- Profession
- Assistant Professor
- Email Address
- [email protected]
Biography
Mohammad Abuabiah is an assistant professor in the Department of Mechanical and Mechatronics Engineering at An-Najah National University, Palestine. He received his Master’s degree (cum-laude) in Mechatronics Engineering in 2015 and his PhD in Control Engineering in 2019 from Politecnico di Torino, Italy. In September 2021, Abuabiah joined the Department of Engineering at the University of Luxembourg (UL) as a Research Fellow. During his studies, he worked on Robust Control and System Identification with application to an automotive problem in collaboration with FCA/Centro Ricerche Fiat, Torino. His main research interests include mechatronics systems, control, system identification and laser additive manufacturing.
Download CV
Education
- Institution
- Politecnico Di Torino
- Country
- Italy
- Degree
- PhD
- Faculty
- Engineering
- Department
- Control
- Thesis
- A set-membership approach to direct data-driven control design
- Speciality
- Control Engineering
- Sub speciality
- Duration
- 2015 - 2019
- Institution
- Politecnico Di Torino
- Country
- Italy
- Degree
- MSc
- Faculty
- Engineering
- Department
- Mechatronics
- Thesis
- Modelling Identification and Control of Dual Dry Clutch Transmission (DDCT) system
- Speciality
- Sub speciality
- Duration
- 2013 - 2015
- Institution
- An Najah National University
- Country
- Palestine
- Degree
- BSc
- Faculty
- Engineering
- Department
- Mechatronics
- Thesis
- An automated Mawr
- Speciality
- Sub speciality
- Duration
- 2008 - 2013
- Institution
- Qadri Tuqan
- Country
- Palestine
- Degree
- High School
- Faculty
- Department
- Thesis
- Speciality
- Sub speciality
- Duration
- 2007 - 2008
Employment History
- Country
- Italy
- Institution
- Politecnico DI Torino
- Position/Job Description
- Teaching assistant
- Period
- Oct. 1, 2016 - Oct. 1, 2018
- Country
- Palestine
- Institution
- An Najah National University
- Position/Job Description
- Instructor
- Period
- Jan. 16, 2019 - Until Now
Publications
- Influence on the bead geometry in Laser Metal Deposition with wire. In Influence on the bead geometry in Laser Metal Deposition with wire. Conference Paper 2023-06-27 Tizia Charlotte Weidemann, Mohammad Abuabiah, Bahaa Shaqour
- Indoor WiFi-Beacon Dataset Construction Using Autonomous Low-Cost Robot for 3D Location Estimation Original research 2023-06-02 Suleiman Abu Kharmeh, Emad Natsheh, Batoul Sulaiman, Mohammad Abuabiah, Saed Tarapiah
- Air Spring Pressure Control in Vibration Isolation System for Vehicle's Seats Conference abstract/paper published in a peer review journal 2022-12-17 Mohammad Abuabiah, Yazan Dabbas, Luqman Herzallah, Ihab H Alsurakji, Peter Plapper
- Modeling and Control of Layer Height in Laser Wire Additive Manufacturing Original research 2022-06-25 Natago Guilé Mbod, Mohammad Abuabiah, Peter Plapper, Maxime El Kandaoui, Slah Yaacoubi
- Analytical Study on the Low-Frequency Vibrations Isolation System for Vehicle’s Seats Using Quasi-Zero-Stiffness Isolator Original research 2022-02-25 Mohammad Abuabiah, Ihab H. Alsurakji
- Bead Geometry Prediction in Laser-Wire Additive Manufacturing Process Using Machine Learning: Case of Study Original research 2021-12-15 Natago Guilé Mbod, محمد ابراهيم فريد ابو عبيه, Peter Plapper, Maxime El Kandaoui, Slah Yaacoubi
- Effective Wastewater Treatment using Advanced Oxidation Process Combined with Magnetic Nanoparticle Setup Conference Paper 2021-10-12 Ihab H. Alsurakji, Amjad El-Qanni, Emad Salahat, Abdelkareem Arman, Mohammad Abuabiah, Waleed Abuzaina
- Gaining a better understanding of the extrusion process in fused filament fabrication 3D printing: a review Original research 2021-04-02 Bahaa Shaqour, Mohammad Abuabiah, Salamah Abdel-Fattah, Adel Juaidi, Ramiz Abdallah, Waleed, Mohammad Qarout, Bart Verleije, Paul Cos
- An H method to design the reference model in direct data-driven control design Conference abstract/paper published in a peer review journal 2020-12-14 Mohammad Abuabiah
- Recovery of Binary Sparse Signals From Compressed Linear Measurements via Polynomial Optimization Original research 2019-07-07 S. M. Fosson, Mohammad Abuabiah
- A kernel-based nonparametric approach to direct data-driven control of LTI systems Conference abstract/paper published in a peer review journal 2018-07-11 Vitro Cerone, Diego Regruto, Mohammad Abuabiah, E. Fadda
- A set-membership approach to direct data-driven control design for SISO non-minimum phase plants Conference abstract/paper published in a peer review journal 2018-01-23 Vitro Cerone, Diego Regruto, Mohammad Abuabiah
- Set-membership identification of a dry-clutch transmission model Conference abstract/paper published in a peer review journal 2017-08-27 Vitro Cerone, Diego Regruto, Mohammad Abuabiah
- Direct data-driven control design through set-membership errors-in-variables identification techniques Conference abstract/paper published in a peer review journal 2017-07-03 Diego Regruto, Vitro Cerone, Mohammad Abuabiah